Twisted Nichrome and Nickel Coil Build

Twisted Nichrome and Nickel Coil Build
Twisted Nichrome and Nickel Coil Build

Here is a Twisted Nichrome and Nickel Coil Build that I have build a few times. It’s really low ohms, so make sure you have a battery that can handle it. It’s very warm but has a flavorful vape. It’s ranking at a .05 ohm build.

Twisted Nichrome and Nickel Coil Build
My supplies I used. Note you will also need a lighter

I started off with 24 gauge Nichrome, 28 gauge Nickel Ni200 wire. A drill, pliers, wire cutters and a lighter.

Twisted Nichrome and Nickel Coil Build
It with them with themselves then twisted them together.

I cut about 2 feet of each wire. Note twisting wire will shorten the length. I  twisted the wires with them selfs, then twisted them with each other.

Twisted Nichrome and Nickel Coil Build
Heat up the wire with a lighter

After I made the twisted wire, I took a lighter and heated up the wire to straighten it and make it a little more bendable. This twisted wire gets very hard, so that is why I heated it up. I heated it up till it was glowing red, but only let it glow for a second. I did a single coil Twisted Nichrome and Nickel Coil Build

I did a single coil Twisted Nichrome and Nickel Coil Build with 5 wraps, which came out to .05 ohms. It is really east to build, but do not build this coil, unless your battery can handle it. See y’all next time and Vape Safe.