Stove Top Coil- Vape Coil
This Stove Top Coil is one of the most flavorful vapes out there. It’s reading at .18 ohms, so use a high drain battery.
I used 24 awg nichrome wire, a 3/32 drill bit, and wire cutters. I ended up using a screwdriver that was the same size as the 3/32 drill bit. And I also used 100% Japanese cotton, as always.
Start wrapping the coils, but wrap them on top of each other. Be careful, It’s really easy to not wrap the wraps on top of each other. I did 5 wraps per coils.
Work out the hot spots and put cotton below the coils. Then when you cotton on the sides of the lead post, when you install the Rda.
This Stove Top Coil- Vape Coil is a really warm vape. Be really care and have a good battery, so it does not blow up. The Stove Top Coil is a lot more vapable when the coils glaze over after a few hours.Thanks for reading about this Stove Top Coil- Vape Coil part 2
Thanks for reading about this Stove Top Coil- Vape Coil and don’t for get to subscribe!