Stainless Steel Coil That Chucks

Stainless Steel Coil That Makes Clouds in The Sky! This build is a beast and has the potential to win cloud competitions. Stainless Steel coils offer spectacular flavor when vaping and build huge clouds. The Stainless steel coils have a fairly low resistance. I have found that vaping on them in temperature control mode works best for me.

The temperature control mode is a pretty sweet tool to use when you are vaping and building your own stainless steel clapton coils. Since the stainless steel clapton coils have a low resistance, they tend to get too hot fairly quickly. The temperature control mode allows for you to keep the coil below a certain temperature, which in turn will make sure your cotton does not get burnt.

A big problem with building your own coils or stainless steel clapton coils, is that mech mods and running your coils on wattage mod will burn your cotton. Once you burn the cotton really bad, it can leave a burnt taste in the RDA forever. Make sure the coil does not get close to 600 degrees Fahrenheit. I try to keep it around 450 Degrees just to be on the safe side.

One dope thing about the stainless steel clapton coils is that they leave really cool looking hot spots. Since they are stainless steel they will make blue, yellow and brown spots on the coil.

Here is how to build the Stainless Steel coil

First off I get good vape wire and make sure it is high quality for my stainless coil.

Stainless Steel Coil

Next, I go and cut one piece of core stainless steel wire. I used 28 gauge wire because I still wanted this coil to be vapeable and if I used like a 22 gauge the ohms would be too low.

Third, I started wrapping the stainless steel clapton wire on the core wire to make tight wraps around the core wire. Stainless Steel Coil

I found that the tighter the wrap, the easier it is to actually make the coils at the end.

Two stainless steel coils were made from all the Clapton wire I made. I did four wraps and vaped on this coil in temperature control mode or around 90 watts because the dual coils came in at .17 ohms.

Stainless Steel Coil